Well, although it is not usual, I dedidido do this tutorial on how to put a zipper. This is my first tutorial and I found another way to do it, so it could be improved.
I decided to upload it for sure some are in the same situation where I was (was not able to put a zipper or a joke, lol)
few days ago I explained this system and it seems easy to me personally , quickly and successfully.
TUTORIAL:
* The first thing to do is measure the fabric and mark the center of it.
* Then we measure the zipper.
* We set the rack as far as taking the reference center and distributing half centimeters to one side and the other half to the other (mark).
* sew with the machine to stitch normal only up to the mark where the rack is placed.
* We turn the fabric and sew back to reinforce the seam.
* perform the same operation on the other side.
* Once the two sides finished, sew the center (where is the zipper) to stitch longer we allow our machine. Thus, the seam will be as follows: A normal seam at each end with going back booster and center-stitched seam too wide to be able to undo later.
* We return to the fabric and the seams open with an iron.
* Place the rack, holding it with a pin, so that the opening of it, marry the union of the 2 materials.
* sew the zipper all around.
* We turn to the web, we opened the center seam (the stitch length) and presto, we appear our rack.
If you want to see photos of work you can see them on my flickr .
I hope that you also be useful and I hope your comments.
I decided to upload it for sure some are in the same situation where I was (was not able to put a zipper or a joke, lol)
few days ago I explained this system and it seems easy to me personally , quickly and successfully.
TUTORIAL:
* The first thing to do is measure the fabric and mark the center of it.
* Then we measure the zipper.
* We set the rack as far as taking the reference center and distributing half centimeters to one side and the other half to the other (mark).
* sew with the machine to stitch normal only up to the mark where the rack is placed.
* We turn the fabric and sew back to reinforce the seam.
* perform the same operation on the other side.
* Once the two sides finished, sew the center (where is the zipper) to stitch longer we allow our machine. Thus, the seam will be as follows: A normal seam at each end with going back booster and center-stitched seam too wide to be able to undo later.
* We return to the fabric and the seams open with an iron.
* Place the rack, holding it with a pin, so that the opening of it, marry the union of the 2 materials.
* sew the zipper all around.
* We turn to the web, we opened the center seam (the stitch length) and presto, we appear our rack.
If you want to see photos of work you can see them on my flickr .
I hope that you also be useful and I hope your comments.
0 comments:
Post a Comment